E-HEATER-HT-24V-65W-KIT
High-temperature heater cartridges
Ideal for high-temperature Thermoplastics such as PEEK or PEI. These cartridges have been designed for longevity at elevated temperatures whilst reducing heat up time. While most standard 3D printer heater cartridges will reach high temperatures, they tend to fail after short service lives. If you are printing high-temperature materials, and need consistent reliable service without downtime for heater failure this is the heater you need.
Strain relief
The cables exit at a 90° angle from the casing with an integrated welded stainless steel strain relief, and come with high amperage rated connectors and extension leads.
Please note:
These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a plated copper, or Nozzle X, as the hardened steel nozzles will lose some hardness at these temperatures.
If you are interested in learning more about the cartridges, have a look at the high-temperature blog post.
⚠️ WARNING: This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
137 Merrivale Rd, Exeter EX4 1PW, UK
Business Hours
Follow Us
Useful Links
Support
VAT Registration Number GB436648959
All Prices are including VAT at the standard UK Rate.
Website Terms and Conditions of use | Privacy Policy | Cookie Policy | Information Security Policy | Refunds and Returns | Terms and Conditions | Clearpay FAQ and How It Works
Copyright © 2024 Uni3dverse. All Rights Reserved