RapidChange Revo
Filter Close
View as

Showing 1–12 of 13 results

Page
1
/ 2
  • Quick view
    Select options Add to wishlist Add to compare

    Revo Nozzles ObXidian

    Rated 0 out of 5
    £46.74
    With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle. This is achieved by pairing a tool steel insert with our new E3DLC™ coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself. Meaning considerably less plastic build-up around the Nozzle.
  • Quick view
    Select options Add to wishlist Add to compare

    Revo Nozzles Brass

    Rated 0 out of 5
    £25.02 – £31.14
    Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and heatbreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.15mm, 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.
  • Quick view
    Select options Add to wishlist Add to compare

    Revo RC Core

    Rated 0 out of 5
    £31.02
    The Revo HeaterCore is a heating and sensing architecture for E3D’s RapidChange Revo ecosystem. It combines a powerful heater and temperature probe into a convenient, compact package.
  • Quick view
    Select options Add to wishlist Add to compare

    Revo HeatCore for Creality Printers

    Rated 0 out of 5
    £31.02
    This is a special Revo HeaterCore intended for use with the Revo CR . It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the hassle of any firmware changes to your Creality 3D printer. Description Upgrade your Creality 3D printer HotEnd to Revo CR – a drop-in Revo upgrade for Creality 3D printers. Improve 3D print quality, machine safety, and enjoy all the benefits of the E3D Revo™ ecosystem.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Revo™ Hemera XS motor

    Rated 0 out of 5
    £28.20
    RRP £23.50   SKU HEMERA-XS-MOTOR   Short description Upgrade your old Hemera with a Hemera XS motor. It’s 92g lighter and 11m shorter than classic Hemera, plus all the torque you need to drive the entire E3D nozzle ecosystem, including Revo Nozzles and SuperVolcano with a Hemera heatbreak.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Revo™ Fully Loaded Sock Pack

    Rated 0 out of 5
    £6.54
    Revo Fully Loaded Sock Pack, 2 x 0.25mm, 0.4mm, 0.6mm, 0.8mm and HeaterCore socks SKU REVO-FL-SOCK-PACK   RRP 4.95 GBP   Short description E3D colour-coded silicone socks for Revo Nozzles. Never run out of silicone socks for your Revo 3D printing setup! This colour-coded sock kit includes ten silicone socks for all your 3D printing needs.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Revo™ Prusa MK3 Edition

    Rated 0 out of 5
    £131.76
    SKU REVO-SIX-175-24V-PRUSA-AS REVO-SIX-175-24V-PRUSA-AS-FL   RRP XXXX   Short description Revo Prusa Edition comes with all the benefits of E3D’s RapidChange Revo ecosystem along with a Prusa specific thermistor extension cable making it a true drop-in replacement for Prusa MK3 i3 variants.
    • Same height, diameter, and mounting as the E3D V6 all-metal HotEnd
    • No machine redesign needed - drops right into your existing setup
    • Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening
    • Anodised black sink and crystal-clear fan mount with fan included
    • Revo HeaterCore included for faster, safer heating
    Kit contains - 1 x Revo Six heatsink - 1 x Revo HeaterCore 24V - 1 x Spring - 1 x Prusa specific extension cable kit - 1 x 100mm PTFE tube Single nozzle kit: - 1 x 0.40 Brass Revo Nozzle Fully loaded nozzle kit: - 1 x 0.25, 0.40, 0.60 & 0.80 Brass Revo Nozzles
  • Quick view
    Add to cart Add to wishlist Add to compare

    Revo™ Six

    Rated 0 out of 5
    £100.00
      SKU XXXX   RRP XXXX   Short description Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package.
    • Same height, diameter, and mounting as the E3D V6 all-metal HotEnd
    • No machine redesign needed - drops right into your existing setup
    • Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening
    • Anodised black sink and crystal-clear fan mount with fan included
    • Revo HeaterCore included for faster, safer heating
      Kit contains -1 x 12V or 24V 30W heater cartridge
  • Quick view
    Add to cart Add to wishlist Add to compare

    Revo™ Nozzles Triple Pack Brass 0.4

    Rated 0 out of 5
    £66.00
    SKU XXXXXX   RRP XXXXXX   Short description Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print.
    • Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera
    • No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one
    • Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the market
    • Compatible with popular FDM 3D printers, such as Creality, Ender, Prusa, Anet, Biqu, Monoprice, and many more
     
  • Quick view
    Add to cart Add to wishlist Add to compare

    Revo™ ObXidian Nozzles x 1

    Rated 0 out of 5
    £46.74
    SKU RC-NOZZLE-OBX-0400-AS-SPK RC-NOZZLE-OBX-0600-AS-SPK RAPID CHANGE NOZZLE ASSEMBLY, 0.40mm, OBXIDIAN, BOXED Our most advanced nozzle yet. Revo ObXidian is our latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.
  • Quick view
    Select options Add to wishlist Add to compare

    Revo™ Hemera XS 12v or 24v Single Nozzle

    Rated 0 out of 5
    £169.62 – £222.30
    SKU REVO-HEMERA-XS-175-12V-AS/REVO-HEMERA-XS-175-24V-AS REVO-HEMERA-XS-175-12V-AS-FL/ REVO-HEMERA-XS-175-24V-AS-FL   RRP £128.50 (Single Revo Nozzle) £168.40 (Fully Loaded) Short description Revo Hemera XS is a compact dual-drive extrusion system. It’s 92g lighter and 11mm shorter than classic Hemera, so it can move faster on your 3D printer’s motion system with less inertia, reducing print artefacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it works with the E3D V6 ecosystem, too. Kit includes - 1 x Hemera XS assembly - 1 x Hemera XS fixings kit - 1 x 40 x 40 x 10mm fan (12V or 24V) - 1 x Revo HeaterCore (12V or 24V) - 1 x Revo HeaterCore spring - 1 x Extension cable kit   Single Nozzle Kit: - 1 x 0.40mm Brass Revo Nozzle   Fully Loaded Nozzle Kit: - 1 x 0.25mm, 0.40mm, 0.60mm & 0.80mm Brass Revo Nozzles
  • Out of Stock Quick view
    Read more Add to wishlist Add to compare

    Revo™ Hemera

    Rated 0 out of 5
    SKU XXXXXX   RRP XXXXXX   Short description Revo Hemera is a compact, powerful extrusion system with the convenience of E3D’s RapidChange Revo ecosystem. With dual drive gears and hardened steel hobbs to grip filament from both sides, Revo Hemera gives your 3D printer exceptional pushing force. A tightly constrained filament path means material can’t flex and bend on its way to the melt zone, making it a top choice for challenging 3D printing filaments, like flexibles.
    • Compatible with Revo Nozzles so you can change nozzles at room temperature using just your fingers
    • Custom motor end-caps provide convenient T-slots for flat mounting, leaving plenty of room for other accessories, like bed levelling probes or part cooling fans
    • Compatible with many popular 3D printers, including the Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. Check out our 3D printer upgrade guides
    • Everything you need is get started is included in the box – just mount it to your 3D printer and start 3D printing